Skip to content
Open
Open
Omnipure ELF XL 10M-P, 3.5 X 10” 10 micron carbon block filter with scale inhibitor

Omnipure ELF XL 10M-P, 3.5 X 10” 10 micron carbon block filter with scale inhibitor

by Omnipure
SKU ELFXL10MPS
Sold out
£89.20 - £89.20
£89.20
£89.20 - £89.20
£89.20

Omnipure ELF XL 10M-P, 3.5 X 10” 10 micron carbon block filter with scale inhibitor (ELF XL 10M-P-S)

Specifications

Flow Rate

 2 gpm

Maximum Operating Pressure

 125 psig

Operating Temperature

 40 to 100 ºF

Rated Capacity

 10,000 gal (Scale 6 Months)

Reduction Claim

 Chlorine, taste, color, and odor reduction with scale/corrosion inhibitor

Carbon Weight

 1.25 lb

Filter Outer Diameter

 3.125 in

Filter Inner Diameter

 2.875 in

Filter Length

 17.5 in

Micron Rating at 10 m

 98 % and up

Chlorine Reduction at 2 Gallon Per Minute (GPM) (Up to 95 Percent)

 15,000 gal and up

Initial Flow Rate at 1.5 Gallon Per Minute (GPM)

 Up to 4.0 psid

Standards

 ANSI (American National Standards Institute) NSF (National Sanitation Foundation)

Scale Reduction

 6 m

Carbon Type

 Acid Washed Activated Bituminous Coal

Filter Head Type

 Non-Valved Valved

Cartridge Applications

N/A

  • Commercial and Residential Drinking Water Systems
  • Pre and Post R.O. Filtration
  • Water Coolers
  • Food Service

General Installation / Operation / Maintenance Requirements

N/A

  • Flush new cartridge for 10 minutes prior to use.
  • Replace cartridge when rated capacity is reached, or when flow becomes too slow
  • Install in compliance with state and local laws and regulations.

Manufacturing Notes

N/A Chlorine reduction capacity based on laboratory testing conducted using test protocol contained in NSF Standard 42. This filtration block is tested and Certified by NSF International under ANSI/NSF Standard 42 for materials only.

Additional Information

N/A Omnipure has developed an entire series of carbon blocks to work in the extra large ELF filter body. The omnipureBlocks™ available in the ELF-Series include Standard 10 and 1 micron carbon blocks, lead-specific carbon blocks and polyphosphate / carbon blocks for equipment protection from contaminants associated with hard water. All Omnipure filter bodies are made with virgin, high-impact polypropylene which is especially ideal for use in applications where sanitary conditions are required. All materials of construction are NSF and/or FDA approved.
The ELF-Series from Omnipure. Cost-effective, point-of-use water filtration for high volume applications.
Water filter heads sold separately.

CARRIAGE IS FREE OF CHARGE TO UK MAINLAND.

cards3.png

Ask us a Question