Skip to content
We have updated our Privacy Notice. These changes are designed to provide greater clarity on how we use your personal information and to consolidate previously separate EU and rest-of-world notices into a single document.
We have updated our Privacy Notice. These changes are designed to provide greater clarity on how we use your personal information and to consolidate previously separate EU and rest-of-world notices into a single document.
Triflow MK. 2 - Push Fit Fittings

Triflow MK. 2 - Push Fit Fittings

by Franke Water Filters
SKU mk2_head_push_fit_fittings
£6.50 - £6.50
£6.50
£6.50 - £6.50
£6.50

These are replacement John Guest push fit fittings as fitted from new on the MK2 White Plastic Housing by the manufacturers - Triflow Concepts®

This is a 2 pack set - comprising of :-

1 x 3/8" push fit fitting for the inlet.
1 x 1/4" push fit fitting for the outlet

 

The fitting instructions are as follows:-

•   Turn off the supply of water to the Housing at the Blue handled Isolation valve.

•   Turn on the filter tap to reduce the pressure in the housing.

•   Cut the BLUE pipe and the GREEN pipe next to the old fitting, (this gives a new end to the pipe work).

•   Change and replace one fitting at a time, so they don't get fitted to the wrong inlet/outlet.

•   Undo the old fitting anti-clockwise and re-fit the new fitting clockwise - DO NOT OVERTIGHTEN.

•   Repeat this procedure on the other fitting.

•   Push the relevant pipes into the fittings, MAKING SURE THEY ARE PUSHED FULLY IN.

•   Turn on water at the Blue handled Isolation valve, leaving the filter tap ON to avoid pressure build up.

•   When water starts to flow through the filter tap, turn it off.

•   Check for leaks.

•   Try to keep the inlet and outlet pipes entering into the housing horizontal.